Эмулятор NCam для Enigma 2

[Administrator]

Ncam 7.9 compiled and patched by marouan & RAED

-[dvbapi + streamserver] Added future audio stream types for ATSC (currently not activated)
-[streamserver] Separate PAT and PMT searching from PowerVu descrambling
-[streamserver] Added 'Caid' setting in the stream relay configuration
(From now on the stream relay accepts a caid setting via the webif. The relay will be enabled only for the caid(s) specified.
Channels with caids other than those specified in this setting will be descrambled via the dvb-api.
An empty setting means the stream relay will be not used at all.)
-(This unconventional encryption system (data are XOR-ed with a dynamic key) works only via the Stream Relay option.
Refer to the wiki for more information on how to configure OSCam-Emu for use with Compel.)

ncam.mips.zip

Ncam-Images-MIPS-IPK.zip

ncam.sh4.zip

NCam-Images-OSDreambox-DEB.zip

[Боты]

TVIZI - Кино и телевидение

находятся тут!
1 плейлист - 2 устройства, без привязки к IP

Перейти на TVIZI

IPTV.ONLINE

Просмотр ваших любимых телепередач с любого устройства в любой точке мира.
1500+ каналов в SD, HD и 4K качестве.
Более 70 тысяч фильмов и сериалов доступно в медиатеке.

Перейти на IPTV.ONLINE

[Administrator]

Ncam v 8.0 compiled and patched by marouan & RAED

-Tryfix for Powervu EMU
-fix orf cards (0D98) au if global is blocked
-Better stream type identification based on descriptors
(NCam now detects the type of each stream pid (video, audio, subtitle, etc) based, not only on the "stream_type" value in the PMT, but on the stream descriptors as well. Stream type detection is crucial when using the extended cw and this patch fixes many problems with PowerVu? channels which had no working audio streams. Stream type detection is now done once and is the same whether the "simple" cw or the extended cw are used.
all based on Nautilus7 great JOB !!!)
-created functions for detecting caid. "tandberg" is renamed to "director", because tandberg is the compary and director is the CA system
-add support for VideoGuard? BSkyB (0960) entitlement date
-[gbx] - fix oscam crash when enable ccc to gbx share

NCam-Images-OSDreambox-DEB.zip

Ncam-Images-MIPS-IPK.zip

[Administrator]

NCam 8.0-r0 .sh4 Emu -r784.

NCam 8.0-r0 .sh4 Emu -r784.rar

[Administrator]

ncam 8.1 sh4 / mips by marouan & RAED

-Fix 1x fallthrough / break
-fix for NDS Standard cards
-Videoguard2 cleanup
-[streamserver] Added Rosscrypt1 support
-Add RossCrypt1 as supported caid
(This is not a functional change, as it works without this also. This is needed just to stop the 'decoding is waiting for matching readers' message in the livelog)
-Add Support (aarch64)

ncam.mips.zip

ncam.sh4.zip

[Administrator]

ncam 8.3 sh4 / mips by marouan & RAED

-[powervu] Added support for hash mode 28-[streamserver] Better audio pid detection, similar to dvbapi
(For some stream types, parse the program element descriptors to determine whether the pid is audio or not.
This way much lower cpu power will be used (no unnecessary descrambling of other stream types).
This is also needed for Rosscrypt1 because the key finding algorithm depends on
accurate detection of video and audio pids)

ncam-8.3.mips.zip

ncam-8.3.sh4.zip

[Administrator]

ncam 9.1 mips / sh4 by marouan & RAED

9.1-ncam.mips.zip

9.1 ncam.sh4.zip

[Administrator]

ncam 9.2 mips / sh4 by marouan & RAED

-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)

9.2-ncam.mips.zip

9.2 ncam.sh4.zip

[avts]

Ncam 9.3 compiled and patched by marouan & RAED
-[powervu] Added support for hash mode 31

NCam-Images-OSDreambox-DEB.zip

Ncam-Images-MIPS-IPK.zip

ncam.sh4.zip

ncam.mips.zip

[avts]

Ncam V 9.6

05-04-2019
-[powervu] Added support for modeCW 4 and modeUnmask 4
All Mipsel devices ipk install file
All ARM devices deb install file

[Administrator]

Ncam v 9.7

-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs

Get available descramblers in box and BISS2 related changes

* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.

ncam.cortexa9hf-vfp-neon.zip

ncam.mips-uclibc.zip

ncam.aarch64.zip

ncam.mips.zip

NCam-Images-OSDreambox-DEB.zip

Ncam-Images-MIPS-IPK.zip

9.7 Ncam.sh4.zip